 |
Ⅱ、HG28A PLASTIC BOTTLE CAP CUTTER
BRIEF INTRODUCTION
PURPOSE: THE PRODUCT IS TO CUT THOSE BOTTLE CAP WITH AUTOMATIC CLEANING AND ADJUSTABLE TEMPRETURE CUTTER. THE BOTTLE CAP MADE WITH THIS PRODUCTS WILL BE SMALL AND SMOOTH WITH NICE LOOKING. |
STATISTICS:
TYPE:HG---28
POWER:0.6KD
PRODUCTION:160 PCS/MINUTE
WEIGHT:300 KGS
SIZE:1060 * 680 * 140MM
|
| Ⅳ. Laminator for Aluminium-Plastic
Bottle Lids |
|
| |
With the development and progress
of medical treatment, the bottle lids used in antibiotics pharmaceutical
and oral solutions for decades have been taken place by new type aluminium-plastic
bottle lids. The bottle lids are matched with inner medicinal butyl
rubber plunger or inner mat dots, they are praised by all pharmaceutical
manufacturing factories because of strong airproof function, non-pollution
and convenience for unsealing.
The machine automatically laminates alumimium lid with plastic lid
which has been made already. The machine has the characteristic of
convenient operation, stable run and high eligible rate. It is trusted
by all lids manufacturing enterprises. We sincerely hope our products
can be your right hand. |
| Main
Technical parameters: |
|
| 1．Product Model： SD-80 |
1．Product Model: SD—100 |
| 2．Output/hour/set:: 4000-5000 pics |
2．Output/hour/set:: 6000-7000只 |
| 3．Specifications of the bottle lid: φ13—φ35mm |
3．Specifications of the bottle lid: φ13—φ35mm |
| 4．Energy Consumption: 3．75KW |
4．Energy Consumption: 4．5KW |
| 5．Weight of the machine: 1200KG |
Weight of the machine: 1600KG |
| Ⅶ. SD-280A Inner Mat Moulded Machine for Aluminium
Plastic Bottle Lids |
| |
The machine mainly used for
making inner matts for theftproof aluminium lids and plastic lids,
it takes the dried national and imported EVA plastic grains as raw
materials which are plasticised, moulded and pressed into lids by
high temperature, so the inner mat is conglutinated with bottle lid.
The machine solves the problems of water and gas leakage without mat
and the manual mat putting which can elicit unhealthful, easy to put
two pieces and low work efficiency.
The machine has the same performance of the
smiliar imported machine, it accords with the national standard of
food sanitary. The machine has small cubage, high work efficiency,
smooth and beautiful mat with convenient operation, so the lid of
the bottle is easy to open with fine airproof ability.
|
| Main
Technical parameters: |
|
Model |
SD-280A |
arrangement of lids feeding |
automatic lids feeding |
Output/hour |
10000-12000(pieces/hour) |
heat energy controls |
temperature controls automatically |
Weight of the spacer |
0．35-0．40 (g/piece) |
Eletricity consumption of the machine |
11KW |
Power of the host |
3KW |
Electrical source |
≈380W 50HZ |
Power of the assistant machine |
3KW |
Weight |
1．6T |
controlled method |
electric machine and linkage controls |
Dimension of Shape |
2700×2100×1500 |
Timing mode |
electric machine frequency conversion timing |
a |
a |
| Ⅶ. SZD Dots Machine with three
feet, four feet and six feet |
| |
The machine is mainly used for
inner mat of three circles, four circles and six circles metal lids
of jar bottle. The mat produced by the machine has the characteristic
of smooth, beautiful and high temperature endurance.
The machine has the characteristics of small cubage, high work efficiency,
convenient operation and economic electrical source. There is a set
of loading arm for automatic temperature controlling, plastic dots
ration and stepless shift. The factory manufactures dots machine for
pulling ring lids and lids of solutions.
|
| Main
Technical parameters: |
|
| 1．Model of the product |
SZD38-85 |
| 2．Output/hour/set |
3000-5000只 |
| 3．Total Energy Consumption |
12KW |
| 4．Weight of the machine |
1000KG |
| 5．Dimension of Shape |
1600×2500×1200 |
|
|
Ⅰ、SY-30B
PLASTIC BOTTLE CAP MOULDING MACHINE
SY-30B(PLASTIC
BOTTLE CAP MOULDING MACHINE
|
|
|
BRIEF INSTROCUTION
THE SY-30B PLASTIC BOTTLE CAP MOULDING MACHINE CAN MELT THOSE
STUDDED PLASTIC WITH HEAT AND CUT INTO THE MOULDING HOLLOWS,
THEN MAKE INTO DIFFERENT TYPES OF CAPS. THE CAPS MADE FROM
THIS MACHINE ARE SMOOTH AND NICE.
IT IS COMPUTER-CONTROLED MACHINE AND OPTIMIZES THE STABILITY
AND ENDURANCE.
IT IS EASILY HANDLED, POWER-SAVING AND LESS COST OF LABOUR.
IT IS TRIPLED THE PROPUCTION CAPCITY OF THE SAME TYPE OF MACHINE.
IT IS A BIG STEP IN THE PRODUCTION OF CAPS AND ABTAINED THE
NATIONAL PATENT.
|
 |
SY-30BPLASTIC
BOTTLE CAP MOULDING MACHINE |
 |
SY-30BPLASTIC
BOTTLE CAP MOULDING MACHINE |
|
| Ⅲ、SY-36A
Plastic Lid Die Cut Machine |
Plastic bottle lid has been one of important parts of packaging
industry of China and in the rapidly increasing period. Our
factory aimed at the demand of the market and developed automatic
die cut machine which produces plastic lids continually and
on the move deliberately. Compares with traditional filling
machine, the machine has many distinct virtues: |
|
1. Low cost with high benefit.
1000 plastic bottle lids produced by the filling machine need
about 4kw./hour but only need less than 1.5kw. hour by the machine.
It also can save vast cooling water. Moreover, the module cavities
of the machine are separated and disconnected with the hot current
channel of the extrusion machine. So the using rate of the material
reaches 98%.
2. High Quality. The die cut technics of the machine adopts
all kinds of comprehensive materials, such as the material with
low index of melt flowage. The low index of melt flowage has
better chap-endurable performance and mechanical performance
to HDPE and better impact performance to polypropylene. In addition,
adjust the heating temperature and cooling temperature of the
processed plastic materials can make the module has better and
more stable shape. So the pressed bottle lids are more beautiful
and the printing effect is better.
3. High produce efficiency. The machine adopts continually working
technics which is different from fitful technics of filling
machine, so the produce efficiency is very high, the products
can reach 12,000 pics every hour. In addition, it is convenient
to replace materials and models and the waste of materials can
be reduced.
4. Save Investment. Compares with the investment of filling
machine, the investment of the machine is little relatively.
It is especially remarkable for volume-producing bottle lids
with high requirement.
Moreover, the machine has other characteristics, such as compact
construction, needs little space on the ground, simple operation,
convenient maintenance and so on.
Main Technical parameters:
| Model |
SD-36A |
| Productivity(pcs/hour) |
10000-12000 |
| Power (KW.) |
Electric machine of the die cut machine |
3KW |
| Electric machine of the extrusion machine |
3KW |
| Heating ring of the extrusion machine |
1×6+0.3×4KW |
| Total |
13.2KW |
| Power, Voltage |
Three phases four lines 380V 50HZ |
| Weight (Kg.) |
2200Kg |
| Volume (length×width×height) |
3550×1100×1500 |
|
| Ⅴ. SD-280 Dots Machine
for Aluminium Plastic Bottle Lids |
|
In order to meet the requirement
of the market, our factory invited automatic high temperature
endurable dots machine for aluminium-plastic assembled bottle
lids of solutions. The machine has following characteristics: |
| |
1. The innder mat of
the bottle lid has even color, it adopts PVC high temperature
endurable raw materials, which can sterilize in high temperature
(115℃-120℃) for an hour, but the inner mat won’t be transfigured
and the bottle lid and the cover of the plastic can’t be plasticized
and damnified.
2. The machine has the automatic function of turning lids, lids
feeding, temperature controlling and dry. The transmission of
drying oven adopts imported products from America. The machine
is easy to operate and convenient to maintenance.
3. It can fill bottle lids 15,000-16,000 an hour. The power
supply for transmission is 2KW and the electricity of drying
oven is 12KW. The total length is 6.5m and the highest is 1.3m.
4. All products of our factory are free to install, debug and
train operators and the products are guaranteed for six months
by free charge.
Our factory produces all kinds of block presses and dots machines
for Crown lids, theftproof aluminium lids, theftproof plastic
lids, jar lids, solution lids. The products are sold to every
city of China and exported to Russia. The main customers of
the machines are Shanghai Yongan Packaging Inc., Shanghai Hailang
Industrial & Trading Company, Jiangsu Yangzhong Hongyun
Lid Making Factory, Shijiazhuang Zongcheng Plastic & Rubber
Co, LTD, Shijiazhuang Yinhuang Packaging Co., LTD, Shangdong
Yantai Lipeng Comapany, Shanxi Yahua Company, Jiangsu Siyang
Aluminium Products Factory, Guangdong Qinyuan Yongyu Lids Co.,
LTD and some companies in Zhejiang, Tonglu, Guangdong, Heilongjiang,
etc.
|
| Ⅵ. SD-32-100 Block Press
for Crown Bottle Lids |
|
The moulded plastic machine
of annular bottle lids is absorbed and strypped-down the smiliar
products at home and abroad. The machine is used for filling
the inner film of the bottle lids. |
It uses PVC mushy resin and Di- (2-ethylhexyl) phthalate
as main materials, mixes, fills and dries by galvanothermy,
then press to form by mechanical method. The product has the
characteristics of ample elasticity, fine glutinosity, neatness,
pleasing shape, low cost, high work efficiency, and economic
materials, uneasy to transformation and gas leakage.
The machine combines energy with heat energy
closely from design, so the distrubution, drying, formation
and exportation are all automatic. There is a set of heat energy
automatic controlled equipment on the machine. The automatic
lids arranging device can adjust automatically according to
needed heat energy, so the stability of the product quality
is guaranteed.
The machine has the characteristics of convenient operation,
energy economy, accurate temperature measurement, long usage
time, high output and so on.
The machine has function to make mat by temperature enduarable
material. The inner mat made by the material can be used for
solutions of soy milk, honeysuckle tea and so on.
|
| |
| Main
Technical parameters: |
|
| 1．Output/hour/set |
6000 pieces |
| 2．Drop volume/piece |
0．30-0．35g |
| 3．Power of the Host |
0．75KW |
| 4．Heating Power |
3KW |
| 5．Voltage |
Three phases four lines AC380V 50HZ |
| 6．One galvanothermy tube |
1 |
| 7．Weight of the machine |
800Kg |
| 8．Heat energy controlled automatically |
automatic |
| 9．Dimension of Shape |
1200×950×1100mm |
| Ⅷ. SD-32-200 Block Press
for Crown Bottle Lids |
|
The moulded plastic machine
of annular bottle lids is absorbed and strypped-down the smiliar
products at home and abroad. The machine is used for filling
the inner film of the bottle lids.
|
It uses PVC mushy resin and Di- (2-ethylhexyl) phthalate
as main materials, mixes, fills and dries by galvanothermy,
then press to form by mechanical method. The product has the
characteristics of ample elasticity, fine glutinosity, neatness,
pleasing shape, low cost, high work efficiency, and economic
materials, uneasy to transformation and gas leakage.
The
machine combines energy with heat energy closely from design,
so the distrubution, drying, formation and exportation are all
automatic. There is a set of heat energy automatic controlled
equipment on the machine. The automatic lids arranging device
can adjust automatically according to needed heat energy, so
the stability of the product quality is guaranteed.
The machine has the characteristics of convenient operation,
energy economy, accurate temperature measurement, long usage
time, high output and so on.
The machine has function to make mat
by temperature enduarable material. The inner mat made by the
material can be used for solutions of soy milk, honeysuckle
tea and so on. |
| |
| Main
Technical parameters: |
|
| 1．Output/hour/set |
12000pieces |
| 2．Drop volume/piece |
0．30-0．35g |
| 3．Power of the Host |
1．1KW |
| 4．Heating Power |
3KW×2 |
| 5．Voltage |
AC380V 50HZ |
| 6．One galvanothermy tube |
2 |
| 7．Weight of the machine |
1.2T |
| 8．Heat energy controlled automatically |
automatic |
| 9．Dimension of Shape |
1300×1500×2100mm |
| Ⅸ. FONLDING MACHINE |
| folding is no longer a problem |
| |
The folding machine is specially developed for those complex lids hard to match with bottle because the built-inanti-theft ring extends outward
|
MAIN TECHNICAL FEATURES
Min.cap diameter:25mm
Max.cap diameter:60mm
Min.cap height:15mm
Max.cap height:25mm
Production capacity (30x20size);up to 35000 caps/hour
installed electrical power:4KW(50Hz)
Absortbed electrical power (approximate);2Kw
Commpressed air consumption(approximate):up to 600 NI/min
|
|
|
